how to draw a 3d headband
This post may contain affiliate links. If you lot purchase something through the link, I may receive a pocket-size commission at no extra charge to you lot.
Spring to Tutorial
These 3D Printed Interchangeable Mickey Ears are fun to make with a 3D printer! They're lightweight, cute and you can make multiple pairs for all of your favorite characters!
To exist able to brand this project, you will need a 3D printer. Chris bought ane a few years ago and nosotros've been experimenting with unlike projects and designs ever since.
These 3D printed interchangeable Mickey ears were some of the get-go things we tried to brand and there was a lot of trial and error with them!
If you don't take a 3D printer of your own, a lot of libraries have Maker Spaces where they take cutting machines (like a Silhouette Cameo or Cricut), 3D printers and more. Check your local library to see what they offer and what you can apply!
If you lot are new to 3D printing there is a learning curve. Chris and I like to browse Thingiverse for ideas and exam prints, it's the all-time manner to learn the software!
For these interchangeable Mickey ears Chris and I experimented with the size and pattern of them for a while until nosotros got them right. I let Chris do the designing and then compared the shape to the Mickey Ears Disney makes and sells until I felt like they were close plenty.
I as well really wanted the ears to be interchangeable so we figured out a way to employ magnets in the ear pattern to go far happen. This is probably my favorite part of the unabridged design, but it isn't necessary if you lot don't want to change out your ear designs during the day!
Interchangeable Mickey Ears have three unlike parts, the
- headband,
- 3D printed magnetic bars, and
- 3D printed Mickey Ears.
If you do not want to make your ears interchangeable, you don't need to impress out the bars and you'll only superglue your Ear designs directly to the headband. Notwithstanding, I think they're easier to store and take up less space if you tin can remove the ears.
Usually asked questions when making 3D Printed Interchangeable Mickey Ears:
i. How do you find the heart of the headband?
I accept a few other Mickey Ears that I used to help me observe the center by laying my own headband on top of them and so using a cloth pen to mark where the ears sabbatum. This was super helpful and easy!
But if you don't accept other headbands to go off of I suggest laying them on a material cut mat and finding the center that fashion (y'all can also use your Silhouette mat!). Lay your ears on top of the headband until you find the desired look, marking the spot with a fabric pen, and and then super glue them on. Easy peasy!
2. Does the headband slide around on your caput if it's windy?
Brusk answer? YES .
Only if you use a certain blazon of material to wrap the headband with you can make it and then that they don't. I suggest wrapping your headband with this textured trim and so using fake suede to put on the inside of the headband. The false suede will grip your pilus and help the interchangeable Mickey Ears (generally) stay put. That's not to say that a strong gust of current of air won't push them a trivial fleck…but they shouldn't slide right off your head unless the wind is crazy potent.
I used satin ribbon for my get-go headband. Don't do this. It is slippery and I had to proceed pushing the headband back in place considering it would slide effectually!
3. What type of glue do you use to keep the ears in identify?
Gorilla super gum is our favorite. It doesn't take long to dry out and information technology is Potent.
Hot glue did not have as good of a grip on the ears then I practice non propose using it. Stick with super glue.
iv. Do yous have a specific type of headband that you advise using for the headbands?
Honestly, any type of headband will work for this. I used these headbands from Amazon and I actually liked them because they were wide and did not squeeze/hurt my head after a few hours of wearing them.
You could also become to Emerge'southward to try to find headbands that you like. Target does non accept them….trust me, I looked.
5. Where tin can I notice designs to use for my Mickey Ears?
Chris and I similar to browse Thingiverse.com for Interchangeable Mickey Ears and other projects!
If you're new to 3D press, using other people'southward designs for personal employ simply is a great mode to get comfy with the software and your printer. One time you get more comfortable you tin start experimenting with your own designs!
FAQ'Due south
Does this tutorial only work with interchangeable ears or can you make a regular pair?
Y'all do non need to make interchangeable ears if you don't want to! I love them because they save infinite in my bag simply information technology isn't necessary to make the ears removable.
You can still follow this tutorial, just exit out the small-scale 3D printed magnetic bar and glue the ears direct onto the headband!
What if I don't take a 3D printer at dwelling?
Nearly library's accept a Maker Station now (ours is chosen Makerspace) that accept all sorts of machines and equipment you can use!
Ours have:
- 3D printers,
- a Silhouette Cameo and Curio
- Heat Press,
- Sewing machines and more!
Brand sure you check to meet if yours is open though! Ours is currently letting you print things on a 3D printer by appointment only.
Silhouette Alta vs. Prusa 3D Printer
I have never used the Silhouette Alta 3D printer so I cannot speak to the ease of printing on it. I would say that the learning curve with the software is probably similar to using the software for the Prusa 3D printer we own.
However, Chris had to build his Prusa 3D printer himself and if parts break on it he has to troubleshoot it all on his own.
What I do like about the Prusa is that yous can buy a part to print upwards to 5 different colors so yous can have a multi-colored design. It's probably my favorite feature.
Merely, the Silhouette Alta comes out of the box ready to go and then it is a smashing choice if yous don't like a lot of set-up!
Instructions
- Place magnets in magnetic bars and ears. Earlier y'all gum them in make sure that you have the magnets turned the correct fashion so the ears and magnetic bars stick together.
- Use super glue to attach the magnetic bars to your headband. (see post on how to observe the center of your headband to get the correct placement for your ears)
- Tightly wrap your headband with the rubberband ribbon. Use hot glue to attach the ends of the ribbon to the headband.
- Cut a piece of the simulated suede ribbon and super gum information technology to the inside of your headband (this volition assistance information technology stay on your head).
- Make a bow using this no-sew tutorial.
- Attach it to your headband in betwixt the ears with super glue.
Source: https://simplymadefun.com/interchangeable-mickey-ears
0 Response to "how to draw a 3d headband"
Post a Comment